495W–520W N-Type TOPCon Bifacial Dual-Glass Solar Module



Product Overview
Chudu Metal supplies 495W–520W N-Type TOPCon bifacial dual-glass solar modules for residential rooftops, commercial and industrial rooftop systems, solar carports and distributed photovoltaic projects.
Available power classes typically include:
495W / 500W / 505W / 510W / 515W / 520W
This module class combines high-efficiency N-Type TOPCon cell technology with bifacial power generation and durable dual-glass construction.
A representative current 54-format platform uses 108 half-cells (54 × 2) with dimensions of approximately 1961 × 1134 × 30 mm, providing high module efficiency while maintaining a relatively compact format suitable for distributed solar projects.
Depending on the selected brand and exact model, electrical parameters, dimensions, connector type, packaging and warranty may vary.
Available Power Classes
| Power Class | Module Type |
| 495W | N-Type TOPCon Bifacial Dual-Glass |
| 500W | N-Type TOPCon Bifacial Dual-Glass |
| 505W | N-Type TOPCon Bifacial Dual-Glass |
| 510W | N-Type TOPCon Bifacial Dual-Glass |
| 515W | N-Type TOPCon Bifacial Dual-Glass |
| 520W | N-Type TOPCon Bifacial Dual-Glass |
Reference Electrical Specifications
The following values represent a current 495W–520W N-Type TOPCon bifacial dual-glass platform.
| Parameter | 495W | 500W | 505W | 510W | 515W | 520W |
| Maximum Power (Pmax) | 495W | 500W | 505W | 510W | 515W | 520W |
| Maximum Power Voltage (Vmp) | 33.72V | 33.95V | 34.17V | 34.39V | 34.62V | 34.83V |
| Maximum Power Current (Imp) | 14.68A | 14.73A | 14.78A | 14.83A | 14.88A | 14.93A |
| Open-Circuit Voltage (Voc) | 40.21V | 40.38V | 40.55V | 40.72V | 40.89V | 41.06V |
| Short-Circuit Current (Isc) | 15.58A | 15.63A | 15.68A | 15.73A | 15.78A | 15.83A |
| Module Efficiency | 22.26% | 22.48% | 22.71% | 22.93% | 23.16% | 23.38% |
| Power Tolerance | 0~+3% | 0~+3% | 0~+3% | 0~+3% | 0~+3% | 0~+3% |
STC Test Conditions
- Irradiance: 1000 W/m²
- Cell Temperature: 25°C
- Air Mass: AM 1.5
The above reference values correspond to a current 495W–520W 54-format N-Type bifacial dual-glass platform.
Main Technical Specifications
General specifications:
| Parameter | Typical Specification |
| Cell Technology | N-Type TOPCon Monocrystalline |
| Module Type | Bifacial Dual-Glass |
| Cell Configuration | Typically 108 Half-Cells (54 × 2) |
| Typical Dimensions | Approx. 1961 × 1134 × 30 mm |
| Typical Weight | Approx. 27 kg |
| Front Glass | Approx. 2.0 mm AR-Coated Glass |
| Rear Glass | Approx. 2.0 mm Heat-Strengthened Glass |
| Frame | Anodized Aluminum Alloy |
| Junction Box | IP68 Rated |
| Protection Class | Typically Class II |
| Maximum System Voltage | Typically 1500V DC |
| Maximum Series Fuse Rating | Typically Approx. 35A |
| Cable Cross Section | Approx. 4.0 mm² |
| Connector | Model / Brand Dependent |
| Operating Temperature | Typically Approx. −40°C to +70°C |
A representative current model uses 108 cells (54×2), 1961×1134×30mm dimensions, approximately 27kg weight, 1500VDC maximum system voltage and a 35A maximum series fuse rating.
Temperature Coefficients
Typical reference values:
| Parameter |
Reference Value |
| Temperature Coefficient of Pmax |
Approx. -0.29%/°C |
| Temperature Coefficient of Voc |
Approx. -0.25%/°C |
| Temperature Coefficient of Isc |
Approx. +0.045%/°C |
A low Pmax temperature coefficient helps reduce power loss when module temperature increases during operation.
N-Type TOPCon Technology
TOPCon = Tunnel Oxide Passivated Contact
N-Type TOPCon technology provides several advantages for modern photovoltaic systems:
- High conversion efficiency
- High power density
- Low LID
- Low LeTID
- Good low-light performance
- Favorable temperature performance
- Low long-term degradation
- High bifaciality
- Stable long-term energy yield
Bifacial Power Generation
Bifacial solar modules can generate electricity from both the front and rear sides.
Representative bifaciality values may reach approximately:
- Pmax Bifaciality: 80% ±5%
- Isc Bifaciality: 80% ±5%
- Voc Bifaciality: 98% ±5%
Actual rear-side power gain depends on:
- Ground or roof reflectivity
- Surface albedo
- Module mounting height
- Rear-side shading
- Mounting structure design
- Module tilt angle
- Row spacing
- Local irradiation conditions
Bifacial gain should therefore be evaluated according to the actual project rather than using one fixed percentage.

Dual-Glass Construction
The representative module adopts dual-glass construction.
Typical structure:
- Front Glass: Approx. 2.0 mm anti-reflection coated glass
- Rear Glass: Approx. 2.0 mm heat-strengthened glass
Dual-glass construction can provide:
- Improved moisture resistance
- Enhanced environmental durability
- Better mechanical protection
- Improved long-term reliability
- Good compatibility with bifacial cell technology
- Reduced risk of backsheet aging
Mechanical Load Capability
Representative current modules may withstand test loads of approximately:
- Front Side: Up to 5400 Pa
- Rear Side: Up to 2400 Pa
Actual structural design must consider:
- Local wind speed
- Snow load
- Building height
- Roof structure
- Mounting orientation
- Rail spacing
- Clamp position
- Local structural codes
Manufacturer-approved installation zones must always be followed.
Solar Module & Inverter Matching
The following electrical parameters should be checked before final system design:
- Maximum Power (Pmax)
- Open-Circuit Voltage (Voc)
- Maximum Power Voltage (Vmp)
- Short-Circuit Current (Isc)
- Maximum Power Current (Imp)
- Number of modules per string
- Number of strings per MPPT
- Inverter maximum DC voltage
- MPPT voltage range
- Maximum MPPT input current
- Maximum short-circuit current
- Lowest expected ambient temperature
- DC/AC ratio
Do not assume that modules from different brands are electrically interchangeable simply because their rated wattage is the same.
Solar Mounting Compatibility
Typical module dimensions:
Approx. 1961 × 1134 × 30 mm
This module format is suitable for:
- Metal Roof Mounting Systems
- Tile Roof Mounting Systems
- Flat Roof Mounting Systems
- Solar Carports
- Commercial Rooftop Systems
- Distributed PV Systems
Chudu Metal can provide compatible mounting components including:
- Aluminum Solar Rails
- Mid Clamps
- End Clamps
- Roof Hooks
- Metal Roof Clamps
- Standing Seam Roof Clamps
- Rail Connectors
- Solar Fasteners
- Other Solar Mounting Accessories
Applications
Suitable applications include:
- Residential Rooftop Solar Systems
- Commercial & Industrial Rooftops
- Factory Rooftops
- Warehouse Rooftops
- Villas
- Solar Carports
- Distributed PV Projects
- Hybrid Solar Systems
- Solar + Battery Storage Systems
Packing & Container Loading
A representative current packing configuration is:
| Parameter |
Reference Specification |
| Modules per Pallet |
Approx. 37 pcs |
| Modules per Stack |
Approx. 74 pcs |
| Pallet Dimensions |
Approx. 1981 × 1140 × 1249 mm |
| Modules per 40HQ |
Approx. 888 pcs |
These values correspond to a representative 1961 × 1134 mm module platform.
Final packing quantity and container loading must be confirmed according to the exact selected model.
Warranty Reference
Representative current N-Type TOPCon modules may provide:
Product Warranty: Approx. 15 Years
Linear Power Warranty: Approx. 30 Years
First-Year Degradation: Approx. 1%
Annual Degradation Thereafter: Approx. 0.40%
Actual warranty terms depend on the selected brand and module model.
Certification & Documentation
Depending on the selected model and destination market, available certifications and documentation may include:
- IEC 61215
- IEC 61730
- IEC 61701
- IEC 62716
- IEC 60068
- IEC 62804
- CE Documentation
- TÜV Documentation
- PID Test Reports
- Product Datasheet
- Installation Manual
- Warranty Document
- Flash Test Report
- Packing List
- Factory Information
- Country-Specific Certification Documents
Information Required for Quotation
Please provide:
- Destination Country
- Destination Port
- Required Wattage
- Preferred Brand
- Required Quantity
- Required Module Type
- Installation Type
- Available Roof or Project Area
- Inverter Model, if available
- Required Certifications
- Required Delivery Time
- EXW / FOB / CIF
- Whether Solar Mounting Is Required
- Whether Inverter or Battery Storage Is Required
Trade Terms
EXW / FOB / CIF
Please contact us for:
- Current Stock
- Latest Price
- Available Brands
- Exact Model Numbers
- Official Datasheets
- Packing Information
- Container Loading Details
- Shipping Quotation
Chudu Metal
Solar PV Modules, Solar Mounting Components & Solar Product Supplier from China
🌐 Website: www.chudufastener.com
📧 Email: han@hbchudu.com
📱 WhatsApp / Phone: +86 19333039217
description2
Contact Us
- barry@hbchudu.com
- +86 18533933520
-
Hebei Chudu Metal Products Co., Ltd.
Our experts will solve them in no time.


Phone
Facebook
Youtube


